EN 10025-2:2019 | European Structural Steel Plate
8 MILLION MT ACTUAL ANNUAL STEEL PRODUCTION
Source S355JR hot-rolled plate for structural fabrication and bulk steel supply. Send your thickness schedule, dimensions, tonnage and destination port for factory pricing.
Review plate specifications ↓Match your structural drawings to EN 10025-2, ordered plate dimensions and the inspection scope required by your project.
| Steel grade | S355JR / Steel No. 1.0045 |
| Product standard | EN 10025-2:2019 — non-alloy structural steel |
| Product form | Hot-rolled structural steel plate |
| Plate tolerances | EN 10029, where applicable, and agreed order requirements |
| Surface | As-rolled finish; other requested conditions subject to quotation |
| Dimensions | Submit thickness × width × length for size and availability confirmation |
| Delivery condition | Specify +AR or agreed delivery condition in the purchase order |
| Impact designation | JR — 27 J minimum Charpy V-notch energy at +20°C (applicable test provisions) |
| Inspection documentation | Heat analysis, mechanical tests and MTC according to ordered requirements |
| Quotation basis | Grade, dimensions, metric tons, required tests and destination port |
Use the thickness band corresponding to your purchase schedule. Your MTC confirms the measured results for each heat and plate lot.
| Nominal thickness | Min. yield | Tensile strength |
|---|---|---|
| 3–16 mm | 355 MPa | 470–630 MPa |
| >16–40 mm | 345 MPa | 470–630 MPa |
| >40–63 mm | 335 MPa | 470–630 MPa |
| >63–80 mm | 325 MPa | 470–630 MPa |
| >80–100 mm | 315 MPa | 470–630 MPa |
| >100–150 mm | 295 MPa | 450–600 MPa |
Reference EN 10025-2:2019 hot-rolled structural steel plate requirements. Tensile and yield values follow nominal thickness; final acceptance also considers the agreed delivery condition and test orientation.
| Grade | Minimum energy | Temperature |
|---|---|---|
| S355JR | 27 J | +20°C |
| S355J0 | 27 J | 0°C |
| S355J2 | 27 J | −20°C |
Specify your project impact temperature and documentation needs when you request a plate quotation.
Check major chemical limits, then estimate tonnage from your finished dimensions before requesting a price.
| Element | Reference maximum |
|---|---|
| Carbon (C) | 0.24% |
| Silicon (Si) | 0.55% |
| Manganese (Mn) | 1.60% |
| Phosphorus (P) | 0.035% |
| Sulfur (S) | 0.035% |
| Copper (Cu) | 0.55% |
| Nitrogen (N) | 0.012% |
Selected heat-analysis limits for S355JR under EN 10025-2:2019. The agreed product conditions and inspection document establish order acceptance.
Estimate theoretical order weight using a nominal density of 7,850 kg/m³.
Theoretical weight is based on nominal dimensions. Final shipped and invoiced weight follows the agreed order terms.
Specify S355JR plate for fabricated structural components that call for EN 10025-2 strength and JR impact quality.
Order plate for welded frame connections, stiffeners, base plates and structural supports in your steel packages.
Source plate for machine stands, fabricated skids, handling equipment and industrial mounting structures.
Connection plates and supporting components for engineered building steelwork.
Structural plate parts cut for welded and bolted assemblies.
Load-carrying plates for industrial equipment and frame foundations.
Steel plate components in access platforms and overhead support structures.
Project-specific structural components selected under engineering design rules.
Structural plate components in industrial conveyors and material-handling equipment.
Work with a steel manufacturer whose production scale, inventory operations and specification-based order handling support your procurement cycle.
Plan recurring purchasing with a manufacturer producing 8 million metric tons of steel annually across its product portfolio.
Manufacturing ↗Our regular inventory spans 1 million metric tons of steel. Send your S355JR sizes and quantities for a current availability check.
Steel Inventory ↗Your EN standard, plate sizes, impact requirements, MTC scope and destination guide the quotation and order execution.
Quality Control ↗Share your plate list with our team to coordinate material options, packing specifications and commercial delivery terms.
Confirm the finish and dimensional requirements of your structural plates before ordering.
Review surface appearance and plate identification against your purchasing specifications.
Provide your requested thickness, flatness, trimming and edge requirements with the size list.
Our manufacturing business combines 8 million metric tons of actual annual steel production with a 500,000 m² factory footprint and 1,000+ employees. You can discuss recurring S355JR purchasing and delivery planning with our steel supply team.
Share the size list and your requested delivery date. Our team will confirm available S355JR plate, production planning options and export arrangements for the order.
List your material certificates, test scope and traceability requirements in the RFQ. Our team will confirm the documentation package linked to your purchase order.
Include any drawing or finished plate sizes with your inquiry. We can confirm available cutting methods, tolerances and delivery arrangements for your order.
Send your preferred destination port, shipping terms and handling requirements. Your quotation can account for secured plate bundles, handling arrangements and agreed shipment documentation.
Review related plate grades and categories. Choose the applicable material standard and impact quality for your project requirements.
EN 10025-2 sets a minimum yield of 355 MPa through 16 mm nominal thickness, with thickness-dependent minima for heavier plate. Check the strength table above for your ordered size.
JR indicates a minimum Charpy V-notch impact energy of 27 J at +20°C under the applicable testing provisions. Specify your project test and certification requirements in the RFQ.
Send your EN 10025-2 standard edition, thickness, width, length, quantity, delivery destination and MTC requirements. Include cutting drawings when you need finished plate parts.
Send your required grade, dimensions, quantity and destination. Our team will review the inquiry.
