Lighter HE wide-flange profiles for specified framing and support applications.
Global Steel Supply & Processing
EN 10025-2:2019 | EN 10365:2026 HEA & HEB Profiles
Source S355JR rolled H sections for steel frames and fabrication. Share your section designation, beam lengths, pieces, required documents and destination port for a quotation.
View HEA & HEB sizes ↓Use the material grade and your exact HE section profile to confirm structural steel dimensions, strength and delivery requirements.
| Material grade | S355JR / Steel No. 1.0045 |
| Material standard | EN 10025-2:2019 |
| Section dimensions and mass | EN 10365:2026 |
| H/I section tolerances | EN 10034:1993, where applicable |
| Product shape | Hot-rolled parallel-flange H sections |
| Common section series | HEA and HEB, with other required designations subject to confirmation |
| Required length | State finished member length and pieces per section |
| Surface / delivery | As-rolled finish; delivery condition specified with your purchase order |
| Inspection | Heat analysis, mechanical tests and requested EN 10204 inspection documents |
| Quotation data | Section designation, mass, lengths, total quantity and destination port |
Compare popular European HE profiles by overall height, flange width, web thickness, flange thickness and nominal mass.
| Profile | h × b × tw × tf (mm) | Mass (kg/m) | Estimate Weight |
|---|---|---|---|
| HEA 100 | 96 × 100 × 5 × 8 | 16.7 | |
| HEA 160 | 152 × 160 × 6 × 9 | 30.4 | |
| HEA 200 | 190 × 200 × 6.5 × 10 | 42.3 | |
| HEB 100 | 100 × 100 × 6 × 10 | 20.4 | |
| HEB 160 | 160 × 160 × 8 × 13 | 42.6 | |
| HEB 200 | 200 × 200 × 9 × 15 | 61.3 |
Reference dimensions and linear mass for standard HEA/HEB sections. EN 10365:2026 is the current dimensional standard. Confirm exact designation, availability and the edition agreed for your order.
Lighter HE wide-flange profiles for specified framing and support applications.
Heavier HE profiles selected for columns and structural members according to design.
Section mass, member length and piece count determine estimated shipment tonnage.
Review H-section geometry for your workshop drawing and incoming material inspection.
Specify flange width and thickness for the profile listed on your structural schedule.
Check the web, flange junction and surface condition expected for your order.
Apply the thickness band corresponding to the relevant rolled section element when specifying structural yield and tensile strength.
| Nominal Thickness | Minimum Yield | Tensile Strength |
|---|---|---|
| ≤ 16 mm | 355 MPa | 470–630 MPa |
| >16–40 mm | 345 MPa | 470–630 MPa |
| >40–63 mm | 335 MPa | 470–630 MPa |
| >63–80 mm | 325 MPa | 470–630 MPa |
| >80–100 mm | 315 MPa | 470–630 MPa |
| >100–150 mm | 295 MPa | 450–600 MPa |
Reference EN 10025-2:2019 values for relevant material thickness. The product form, test specimen and applicable acceptance provisions determine final inspection.
Check typical maximum heat-analysis limits and specify the material certificate required for your structural fabrication.
| Element | Maximum Mass Fraction |
|---|---|
| Carbon (C) | ≤ 0.24% |
| Silicon (Si) | ≤ 0.55% |
| Manganese (Mn) | ≤ 1.60% |
| Phosphorus (P) | ≤ 0.035% |
| Sulfur (S) | ≤ 0.035% |
| Nitrogen (N) | ≤ 0.012% |
| Copper (Cu) | ≤ 0.55% |
EN 10025-2:2019 S355JR reference chemistry. Nitrogen exceptions and carbon-equivalent provisions follow the standard and product conditions.
Share your structural drawings, required steel designation, product delivery condition and weldability-related acceptance requirements.
Source HE sections for structural members specified to the required EN material and impact quality.
HE sections used in fabricated columns, framing beams and bolted structural connections.
Fabricated H members for workshop columns, mezzanines and engineered support frameworks.
Specify structural steel beams for load-bearing frames and column lines.
HEA and HEB structural members for industrial building and plant steelwork.
Rolled beam sections for welded and bolted assemblies, with your approved drawings.
Support frames, mezzanine beams and access platforms in engineered structures.
Beam members for equipment skids and machinery supporting frameworks.
Beam sections supplied to specification for transport and civil steelwork.
Include all HE profiles, cut lengths and quantity per section in one RFQ.
Use documented company capacity, stock coordination and material requirements to support your repeat structural steel purchasing.
Your bulk procurement is supported by our real annual steel production across product categories.
Manufacturing ↗Our combined steel inventory supports supply planning. Confirm S355JR section sizes and stock individually.
Steel Inventory ↗Define EN material requirements, section dimensions, JR impact scope and inspection documents in one RFQ.
Quality Control ↗Send lengths, pieces, destination port and packing requests for an order-specific shipping quotation.
Contact Sales ↗Our company produces 8 million metric tons of steel annually across its product categories. Your structural steel purchase can be organized around exact section designations, piece counts and delivery dates.
Share HEA/HEB size, beam length, quantity and delivery requirements. Our company maintains regular inventory across steel categories; our team will confirm current S355JR H-section stock and production arrangements for your exact list.
Choose the nominal HE profile, enter beam length and piece count to estimate the total order weight.
Reference linear mass × length × number of beams. Actual dispatch mass follows the accepted section standard and contract.
Specify material acceptance before ordering. Your inspection schedule can include grade confirmation, section measurement, JR impact verification and supporting certificates.
Include member lengths and drilling drawings with your H-beam order to confirm practical processing options and corresponding tolerances.
Finished lengths and end-squareness requirements from your section schedule.
Flange and web hole locations, bolt patterns and fabrication drawings.
Blast cleaning, primer or protection requirements specified with your order.
Specify beam lengths, piece count, shipment tonnage and destination port. We will confirm handling, bundling and export arrangements against your purchase order.
Review related material grades and section standards for your project. Each grade follows its own testing and acceptance requirements.
EN 10025-2:2019 specifies the S355JR material grade. EN 10365:2026 defines HE section dimensions and masses, and EN 10034 provides relevant H/I-section dimensional tolerances.
S355JR specifies a 355 MPa minimum yield strength for nominal thickness up to 16 mm and the JR impact characteristic of 27 J at +20°C under applicable testing provisions.
Multiply the profile's kg/m reference mass by the requested length in metres and the number of beams, then divide by 1,000 for metric tons.
Provide your HE profile, cut length, number of beams, inspection certificate requirements and destination port. Add fabrication drawings for processing services.
Send your required grade, dimensions, quantity and destination. Our team will review the inquiry.