500 HBW nominal · Original SSAB brand · Heavy-duty wear parts
Order by actual plate thickness, original maker specifications and required documentation.
| Purchase item | SSAB Hardox® 500 data |
|---|---|
| Brand / original manufacturer | SSAB / Hardox® 500 |
| Product type | Abrasion-resistant steel plate and sheet |
| Plate thickness | 4.0–103.0 mm (SSAB product program) |
| Sheet thickness | 2.0–7.0 mm (separate product form) |
| Plate width / length | Up to 3,350 mm width; up to 14,630 mm length in SSAB dimension program |
| Nominal hardness | 500 HBW class; actual hardness bracket follows thickness |
| Delivery condition | Quenched, or quenched and tempered |
| Inspection basis | EN ISO 6506-1 hardness test per SSAB product data |
| Surface / edge | Mill surface and edge condition to SSAB delivery specifications |
| Supporting documents | Original mill document and heat / plate identification by purchase agreement |
| Order details | Dimensions, quantity, optional cutting list, destination and delivery term |
Provide the information that determines your source check and quotation.
SSAB product dimensions describe the manufacturer’s available program. BAOSTEEL METAL confirms specific lot sourcing and delivery details against each enquiry.
Choose the thickness first: the original SSAB guarantee depends on product form and thickness.
| Product form | Nominal thickness | SSAB hardness reference |
|---|---|---|
| Hardox® 500 sheet | 2.0–7.0 mm | 470–530 HBW* |
| Hardox® 500 plate | 4.0–32.0 mm | 470–530 HBW |
| Hardox® 500 plate | 32.1–103.0 mm | 450–540 HBW |
*For sheet below 2.5 mm, SSAB calculates the listed hardness from tensile strength. Direct Brinell hardness measurement and guarantee follow the original thin-sheet documentation.
SSAB measures plate hardness according to EN ISO 6506-1 on a milled surface 0.5–3 mm below the plate face. Include your thickness and inspection requirements to identify the applicable original-mill criteria.
Different product forms have separate maximum chemical-analysis limits. Match your order with the original SSAB plate or sheet specification.
| Element (maximum, mass %) | Hardox® 500 plate | Hardox® 500 sheet |
|---|---|---|
| Carbon (C) | 0.30 | 0.27 |
| Silicon (Si) | 0.40 | 0.50 |
| Manganese (Mn) | 1.30 | 1.60 |
| Phosphorus (P) | 0.020 | 0.025 |
| Sulfur (S) | 0.010 | 0.010 |
| Chromium (Cr) | 2.20 | 1.20 |
| Nickel (Ni) | 2.00 | 0.25 |
| Molybdenum (Mo) | 0.40 | 0.25 |
| Boron (B) | 0.005 | 0.005 |
Maximum heat-analysis values from the SSAB Hardox® 500 product specification. The actual chemical analysis and applicable requirements follow the original mill documents for your purchased lot.
Review the material form and original mill identification before preparing cut parts.
Confirm surface condition and material traceability for your specified lot.
Specify plate thickness, edge delivery and finished dimensions in your RFQ.
Common wear-part requirements include particle abrasion, repeated material flow and heavy-duty contact. Choose the plate by wear mechanism and component design.
Wear panels and replaceable crusher components exposed to abrasive material.
Screen and sorting components in quarry and mineral-processing equipment.
Chute sides, bottom liners and transfer-point wear components.
Wear-facing parts for bins, feeders and material discharge areas.
Replaceable wear elements for high-contact material paths.
Selected scrap and bulk-material handling wear components.
Replaceable impact and abrasion parts.
Hard-wearing screening equipment components.
Material flow surfaces with replaceable lining.
Send your wear-part drawings for a plate and cutting quotation.
Your enquiry combines original-brand verification with the purchasing support of a large-scale steel business.
Our company produces 8 Million MT of steel annually across its steel portfolio. These company-wide operations support purchasing coordination.
Specify genuine Hardox® 500 and request original-mill product documents, heat traceability and source confirmation.
Share multiple plate dimensions and cut-piece schedules in a single enquiry for a coordinated quotation.
Confirm material lot, packing, shipping terms and destination details before purchase.
Compare the original SSAB grades by hardness class, available thickness and the operating demands of your parts.
| Product | Key reference | Application and grade-selection focus | Details |
|---|---|---|---|
| Hardox® 450 | Nominal 450 HBW | Wear components balancing hardness and fabrication demands | Hardox 450 → |
| Hardox® 500 | Nominal 500 HBW; 4–103 mm plate | High-abrasion wear bars, liners and chutes | Current product |
| Hardox® 500 Tuf | 475–505 HBW; 4–38.1 mm plate | Narrow hardness bracket with enhanced toughness focus | 500 Tuf → |
| AR500 / NM500 | Other manufacturer specifications | Different commercial / national technical documents | AR500 → |
Use the exact grade and original maker specification stated in your project documents to define the material acceptance criteria.
Ask for documentation tied to your purchased heat and plate lot.
Identify SSAB as the material manufacturer in your RFQ. Request heat identification, original mill certificates and thickness-specific hardness criteria as part of your purchase package.
Where the cutting arrangement is available, provide drawings and tolerance requirements for a combined material and processing quote.
Send laser, plasma, oxy-fuel or drilled-blank requirements with plate thickness and part drawings. Cutting method and achievable tolerances are confirmed against the specified plate and order scope.
Get material sourcing, packing and freight details tied to the exact thickness and quantity you request.
BAOSTEEL METAL maintains regular inventory across its steel operations. For Hardox® 500, our team confirms original SSAB material availability by source, lot, thickness and destination.
Calculate a nominal shipment quantity before submitting your cutting list. Actual consignment weights follow the agreed weighing basis.
Calculator result is a theoretical estimate using entered nominal dimensions.
Include the information below for a product and delivery quotation.
Browse other grades while keeping each material’s source, hardness range and certification requirements separate.
Original SSAB 400 HBW grade
Original SSAB 450 HBW grade
SSAB tough 500 HBW-family grade
Commercial 500 HBW-class wear plate
GB/T 24186 NM-series wear plate
GB/T 24186 450-class wear plate
Fast answers for original-brand material enquiries, documentation and order planning.
SSAB lists Hardox® 500 plate from 4.0 to 103.0 mm. Share your thickness, dimensions and quantity to confirm an available original-material lot.
SSAB lists 470–530 HBW for plate 4–32 mm and 450–540 HBW for plate 32.1–103 mm. The original mill specification governs the supplied lot.
Include original SSAB mill documentation, heat identification and applicable hardness inspection data with your RFQ.
Submit your cutting drawings, thicknesses, quantities and part tolerances. We will confirm the processing scope and quotation conditions.
Hardox® is a registered trademark of the SSAB group. SSAB is the manufacturer of Hardox® 500. BAOSTEEL METAL is the contact for enquiries and confirmed material supply arrangements.
Send your required grade, dimensions, quantity and destination. Our team will review the inquiry.
